• Regular Pot Life - Purple
• Longer Pot Life - Blue
• Fast Curing - Red
• Brushable - Light Purple

All materials available in drums.

Platinum Cured materials
available upon request.

• 2125 GREEN
• 2125 BLUE

Architectural Moldmaking

• 2125 GREEN

Foundry Art casting

• 2125 BLUE
• Brushable Blue

Food Grade
107 – SOFT
113 – MEDIUM-SOFT
122 – MEDIUM
128 – FIRM

Candle and Soap Making
107 – SOFT
113 – MEDIUM-SOFT

Skin Silicone

• Stretch FX
• Skin
• Silicon Fluids

Silicone Fluid

Specialty Silicones

• 130T Translucent
• 135
• Fake Ice

Regular Pot Life

SOFT 107 shore A durometer mold making silicone.  2lb Kit

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.

Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

Regular Pot Life

MEDIUM 122 shore A durometer mold making silicone.  2lb Kit

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

FIRM 128 shore A durometer mold making silicone.  2lb Kit

This silicon is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

Regular Pot Life

MEDIUM 122 shore A durometer mold making silicone. 10 lb Kit

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

FIRM 128 shore A durometer mold making silicone. 10 lb Kit

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

SOFT 107 shore A durometer mold making silicone. 44 lb Kit

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.

Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

Regular Pot Life

S-MED 113 shore A durometer mold making silicone.  44 lb Kit

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour 11-15 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

MEDIUM 122 shore A durometer mold making silicone.  44 lb Kit

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

FIRM 128 shore A durometer mold making silicone.  44 lb Kit

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Regular Pot Life

EXTRA FIRM 135 shore A durometer mold making silicone.  44 lb Kit

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Longer Pot Life

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.

Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

Longer Pot Life

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.Ideal for the molding of picture frames, fireplaces and parts with severe undercuts

Longer Pot Life

A durometer mold making silicone with longer pot life catalyst.
This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability
and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Longer Pot Life

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.

Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

$369.99
+ 39.99 shipping

Continental USA
UPS Ground

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour 11-15 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Longer Pot Life

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.Ideal for the molding of picture frames, fireplaces and parts with severe undercuts

Longer Pot Life

A durometer mold making silicone with longer pot life catalyst. This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Fast Curing

Fast Curing

MEDIUM 122 shore A durometer mold making silicone

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.Ideal for the molding of picture frames, fireplaces and parts with severe undercuts

Fast Curing

FIRM 128 shore A durometer mold making silicone 

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

IDEAL for model makers, hobbyists and do it yourselfers who use casting resins, epoxies, polyesters and polyurethanes.

$94.99
+ 16.99 shipping

Continental USA
UPS Ground

Fast Curing

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

When your application requires an in-between silicone. Not to Soft, not to hard. This 11-15 duro silicone is excellent for cup molds and for the molding of small detailed pieces. Good flexibility and stretch. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Fast Curing

MEDIUM 122 shore A durometer mold making silicone

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.Ideal for the molding of picture frames, fireplaces and parts with severe undercuts

Fast Curing

FIRM 128 shore A durometer mold making silicone

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Brushable

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

Brushable

This silicon is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

Brushable

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

Brushable

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.

Brushable

This silicon is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life'

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Green Catalyst

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Green Catalyst

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Blue Catalyst

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life'

A system designed for making brushable & lay up mold
Easy to mix 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Food Grade

This FG - Catalyst systems main application is indirect food contact applications governed by CFR 177.2600.

NOTE: any compositional deviation will result in the material being non-compliant. This applies to off ratio mixing as well as use of additives.
IDEAL for making molds for the casting of Chocolate, Candy, Dough and other Gourmet Food Reproductions.

This is a 5-9 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De -Mold 12 -24 hours. READ COMPLIANT info

This FG - Catalyst systems main application is indirect food contact applications governed by CFR 177.2600.

NOTE: any compositional deviation will result in the material being non-compliant. This applies to off ratio mixing as well as use of additives.
IDEAL for making molds for the casting of Chocolate, Candy, Dough and other Gourmet Food Reproductions.

This is a 21-25 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info

Food Grade

This FG - Catalyst systems main application is indirect food contact applications governed by CFR 177.2600.

NOTE: any compositional deviation will result in the material being non-compliant. This applies to off ratio mixing as well as use of additives.
IDEAL for making molds for the casting of Chocolate, Candy, Dough and other Gourmet Food Reproductions

This is a 26-30 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info.